When you remodel a kitchen, you must plan each step. In Denver, walls that hold weight make work hard. This guide shows you Denver rules for wall changes.
A wall holds the roof, floors, and more. Change a wall without care, and you risk problems. Learn which wall bears weight and what work you can do.
Ask an Expert
Hire a structural engineer or trusted contractor. They read local codes. They mark the wall that holds weight. They plan the work safely.
Get Permits
In Denver, any wall change needs permits. Your expert fills out forms. The permit shows the work meets local law.
Plan Your Kitchen
Draw a layout of your new kitchen. A removed wall can open your space. A new plan makes room work well.
When you remove a weight wall, add a beam. The beam holds the load. There are two beam types:
Wood Beams
Good for short spans. They cost less. They match many looks.
Steel Beams
Fit long spans or heavy loads. They give strong support.
Put props near the wall during work. Your expert sets these props as best as possible. The props help hold weight until the beam is in place.
Each town has its own rules. In Denver, codes help keep people safe. All work on wiring, pipes, and weight changes must stick to these rules. An inspector checks the work to see if it is right.
After work is done, a licensed checker sees the wall and beam. The inspection makes sure the work meets Denver rules and is safe.
The work on weight walls in Denver needs care. Ask experts, get permits, and check all codes. This plan lets you change your kitchen while keeping the home safe.
Tags: homerenodeling