When you start a kitchen remodel with a new deck, check your build’s strength. The deck ledger attachment holds the deck to your home. Following Denver Building Code rules makes your work safe, legal, and strong.
A deck ledger is a wood board that links a deck with a house. It must carry much weight and add strength to your work. In Denver, the proper set-up of this board is a must.
Denver rules say the ledger board must use wood that lasts. Pressure-treated wood or wood that does not rot is best.
A typical board is 2x8 or 2x10 inches. It must be thick enough to hold the deck’s weight. Check the rules for project details.
Flashing is a strip that stops water from coming in between the deck and house. Rules say the flashing must run 12 inches beyond each side of the ledger board and match the home’s siding to stop decay.
Your fasteners must follow Denver rules. Use lag screws or bolts, not nails, as nails can break over time. Each fastener must go at least 1.5 inches into the house frame.
Fasteners should be no more than 16 inches apart. This close spacing helps keep the deck firmly attached.
In Denver, you need a permit and an inspection after the work is done. Follow all rules to avoid costly fixes later.
• Get Help: If you are unsure about Denver rules, hire a deck contractor. A pro can do the work right.
• Check Local Rules: City rules may change details. They can affect the design and the wood you choose.
• Stay Informed: Building codes can change over time. Stay up to date so your project stays safe.
Know the deck ledger rules in Denver if you plan a kitchen remodel with a deck. A deck built with care stands strong, stays safe, and lifts your home’s value. Call a pro when you need help and stick to the rules to enjoy a deck that lasts.
Tags: decks